Pulley Assembly Parts

Pulley Bracket w/ Hardware: Powder-coated Pulley Bracket with Pulley Bolt & Nut.

Ralmark Pulley: Anti-friction bearing aircraft pulley from Ralmark Corp.

Cable with Hardware: Please see THIS PAGE for Cables.

Carriage Parts

Carriage with Bronze Bushings: Now made with a reinforced collar to withstand rigorous usage in a busy professional setting. If interested, please inquire: info@efficientvelo.com

Binder Wrenches with Ball Knob: One goes with the Right Arm Receptacle and one goes with the EZ-Lift Carriage & Tube. If this item needs to be replaced, you may also need the hardware that goes with it (see below).

Binder Wrench Hardware: Finish Washer, Screw & Spring for Binder Wrench. Sold by set

Binder Bolt, Standard: Each Binder Wrench needs a Binder Bolt.

Binder Bolt, XL: Extra length for double-Wrench upgrade. Coming soon.

Rotational Binder Shoe: This short brass shoe with o-ring is used in the Right Arm Receptacle. It can sometimes fall out and get lost, especially while moving your Stand. 

Vertical Binder Shoe: This long brass shoe with spring is used in the Carriage Assembly of the EZ-Lift.

Ball Knob with Set Screw: Replacement Ball Knobs are available. 

(new) Contact Plus ⅛ Turn Max Sticker: A reminder not to over-tighten the Binder Wrench on the Carriage which could cause cracks or damage. 

Other Parts

Presta Cap: The Presta Cap is a proprietary part used on almost all of our inflation tools: The 2-in-1, Bam-Bam, Presta Only & Idiot Proof Inflators.

Lever Valve: A Milton brand replacement lever valve for your EVT Inflation tool. If your lever valve is leaking air, you can do a bit of maintenance. Disconnect the inflator from its air source. Remove large brass nut from lever valve and inspect / clean the plunger of the lever valve. Take care not to damage the o-ring. If the o-ring needs replacement, they are a standard size and available at hardware stores. If this fails, you may need a new lever valve!